WS39 casing tooth
JM cutter tooth
B47K22 bullet toothDRILLNOVA / ROTARY DRILLING TOOLS
Soil & flat teeth
BFZ cutting teeth for bucket and auger systems. Compare the broad-edge profiles, shank geometry and dedicated holder options using their actual catalogue drawings.
Compare the cutting edge and shank.
BFZ72 and BFZ70-2 present broad cutting edges with different upper lengths and shank/retention depictions. BFZ80-B is a longer wedge-shaped tooth with its own named holder. Compare the body form before treating any of these as a replacement.
BFZ72
Flat cutting tooth with multiple inserts across its top and sides; 106 mm upper section shown.
Request this configuration
BFZ70-2
Different retainer/shank depiction and 100 mm upper section, compared with BFZ72.
Request this configuration
| Reference | Length as shown | Distinction |
|---|---|---|
| BFZ72 | 106 mm upper + 60 mm lower | Broad face with inserts across the upper and side edges |
| BFZ70-2 | 100 mm upper + 61 mm lower | Different shank and retainer depiction |
| BFZ80-B | 253 mm overall | Long wedge-style body; dedicated holder |
Keep the holder with the tooth reference.
Flat-tooth holder
Flat-tooth holder with the illustrated seat and retention opening.
Request this configuration
BFZ80-B Holder
Dedicated BFZ80-B holder with front and side views for interface identification.
Request this configurationA broad cutting edge is only useful when the tooth remains correctly supported. Inspect the seat for wear and confirm the retained position against an unworn assembly. The first holder has no model code in the catalogue. Check its seat and retainer against the selected BFZ tooth.
From cutting edge to complete tool.
On a drilling bucket
The edge profile and tooth projection work with the bucket opening and cutting plate. Preserve the original holder position when replacing the wear element; changing projection can change the cutting path relative to the bucket body.
Review bucket configurationsOn an auger
Review the outer cutting diameter, pilot and flight entry together. A wider or longer tooth may require a layout review even if its shank can be placed in a holder.
Review auger configurationsAll dimensions are catalogue references in mm. Preserve exact suffixes and check the selected seat and retainer.
PRODUCT & PROJECT ENQUIRY
Choose the flat tooth and holder.
Share the model, quantity and your current application. A photograph or drawing helps us check the complete configuration.