WS39 casing tooth
JM cutter tooth
B47K22 bullet toothCasing shoe components
Casing teeth & wear bars
WS39 and WS46 teeth with their holders for the cutting ring. BA weld-on bars for local wear protection on the casing and casing shoe.
Match the tooth and holder
Compare each tooth with its named holder, then confirm the seat, retention and installed projection against your shoe drawing.
WS39 · Tooth & holder
WS39 cutting profile and matching holder reference. Specify the required teeth, holders and retention parts separately.
Enquire about this pairWS46 · Tooth & holder
WS46 cutting profile and matching holder reference. Check the holder seat and retention arrangement for this model.
Enquire about this pairDimensions are shown on the original catalogue drawings. Confirm the selected tooth, holder and retention parts against the order drawing.
Weld-on wear bars
BA bars are welded to selected wear areas on the casing or casing shoe. Choose the body profile and carbide arrangement for the area being protected.
For BA50-29, use the 26 mm side-view dimension shown in the drawing; the model suffix does not define thickness.
Check the position on your casing shoe
Use the shoe drawing and clear photos of the existing assembly to confirm the following.
Inner & outer clearance
Check the inner and outer cutting projections against the shoe and casing body. Include the casing diameters and wall thickness.
Tooth, seat & retention
Match the tooth profile, holder seat and pin or retainer. Compare installed projection with neighbouring teeth, especially when replacing part of a worn ring.
Wear-bar position
Mark the area to be protected. Check the bar curvature, welding contact surface and projection relative to the inner and outer clearances.
Parts & quantities
List teeth, holders, pins or retainers, and BA bars separately. Include the model, quantity and drawing revision for each item.
Product enquiry
Start with the shoe and the parts you need
Send a shoe photo or drawing, casing dimensions, model and quantities. Mark the tooth positions or wear areas, identify any existing parts you plan to reuse, and include the delivery country.