WS39 casing tooth
JM cutter tooth
B47K22 bullet toothCutting components · DR & DT series
Weld-on teeth
Choose the profile. Confirm the weld base.
Eight weld-on tooth profiles for cutting-tool layouts. Compare the dimensions and body shape, then share the tool and welding position to confirm the model.
Compare the weld-on profiles
Select up to three models. The comparison uses the original catalogue references, with the full model suffix retained.
DR series
DR1/40G
33.38 mm19 mm
Pointed carbide profile.
Weld-on body
- Confirm the weld base, tooth orientation and tool layout.
DR2/100G
33.6 mm19 mm
Rounded carbide profile.
Weld-on body
- Confirm the weld base, tooth orientation and tool layout.
DR3/100G
49.4 mm25.4 mm
Pointed carbide profile.
Weld-on body
- Confirm the weld base, tooth orientation and tool layout.
DR4/100G
63.5 mm31.8 mm
Rounded carbide profile.
Weld-on body
- Confirm the weld base, tooth orientation and tool layout.
DT series
DT1/65G
25 mm32 mm13 mm
Carbide edge with a straight body profile.
Weld-on body
- Confirm the weld base, tooth orientation and tool layout.
DT2/200G
38 mm45 mm22 mm
Carbide edge with a straight body profile.
Weld-on body
- Confirm the weld base, tooth orientation and tool layout.
DT50/200G
44 mm46 mm13 mm
Carbide edge with a curved body profile.
Weld-on body
- Confirm the weld base, tooth orientation and tool layout.
DT87/200G
65 mm50 mm21 mm
Carbide edge with a sloping body profile.
Weld-on body
- Confirm the weld base, tooth orientation and tool layout.
Dimensions are catalogue references in mm. Model suffixes are retained as printed. Use the dimension sheet to identify the profile; confirm the order drawing for the installation.
Match the tooth to the tool
Weld-on teeth can form part of auger, drilling-bucket and HDD-tool cutting layouts. Select the profile for its welding position, orientation and ground conditions; confirm the individual model against the tool drawing.
Tool & ground
Tool type, cutting layout, ground conditions and photographs of the existing teeth.
Mounting & orientation
Welding contact surface, available space, tooth orientation and the selected drawing.
Supply requirement
Full model reference, quantity and delivery destination. Mark any positions that need a different profile.
Let’s match your weld-on teeth.
Send a whole-tool photo, a close-up of the tooth and weld base, the model, quantity and destination. Include the mounting drawing when available.