WS39 casing tooth
B47K22 bullet toothDRILLNOVA / ROTARY DRILLING TOOLS
JM trench cutter teeth
JM is a plate-profile trench cutter tooth. Compare JL, JM and JR using the actual drawings, mounting face and cutter-wheel position before ordering.
- 150 mm
- Height
- 67 mm
- Width
- 39 mm
- Thickness
JL, JM and JR: inspect the shape
JL, JM and JR share nominal dimensions of 150 × 67 × 39 mm, with different cutting profiles and edge orientations. Match the outline and mounting face as well as the size.
JL
JL profile: 150 × 67 × 39 mm nominal envelope. Compare the cutting-edge outline and mounting face with the installed part.
Request this configuration
JM
JM profile: 150 × 67 × 39 mm nominal envelope. Compare the cutting-edge outline and mounting face with the installed part.
Request this configuration
JR
JR profile: 150 × 67 × 39 mm nominal envelope. Compare the cutting-edge outline and mounting face with the installed part.
Request this configuration| Reference | Height | Width | Thickness | Profile |
|---|---|---|---|---|
| JL | 150 | 67 | 39 | JL cutting-edge outline; see drawing |
| JM | 150 | 67 | 39 | JM cutting-edge outline; see drawing |
| JR | 150 | 67 | 39 | JR cutting-edge outline; see drawing |
The wheel position defines the required profile
Record the tooth in place
A detached tooth shows its body shape. A photograph on the cutter wheel also shows its orientation, holder, neighbouring teeth and the direction in which the cutting edge is presented. Keep both views when comparing a replacement.
Compare wear by position
Keep the wheel position with each inspection photograph. Edge chipping, loss of carbide, body erosion and seat movement are different observations. Comparing them by location is more useful than combining all removed teeth into a single wear judgement.
OEM fit is not specified for these models. Match the tooth to the actual cutter-wheel and holder drawing.
PRODUCT & PROJECT ENQUIRY
Match the profile to its wheel position
Send each required profile reference and its quantity, the delivery country, wheel and holder photographs, and installation positions. Include an unworn tooth and the removed part where available.